Showing posts with label Apollo Restoration Project. Show all posts
Showing posts with label Apollo Restoration Project. Show all posts

Wednesday, February 22, 2017

VIntage Apollo Restoration - It's done.



Actually, it was finished back in September, but I have been slack updating the blog.

I was happy with the overall build. 


A few things to note. 

The internal 3 speed hub that was with the original bike was a little too far gone for me to get into a working shape so I opted for the easy way out and replaced the wheels with a Taylor Wheels with Shimano Alfine 8-speed hub  with the front wheel also housing a dynamo  hub. I opted for a brooks Flyer saddle and I made the leather handlebar grips myself. 


All in all, it was a pleasant build that went together as smoothly as the ride itself. 

Complete Parts Breakdown

  • Dia GRAND COMPE CLASSICO Crank 46t x 165mm Track Fixed Gear Bike Crankset & Bottom Bracket 
  • Velo Orange Tourist Handle Bars
  • Fixed Road Bike Bicycle Quill Stem 25.4mm X 150mm 22.2mm 1'' Alumimum 60 Deg
  • VP-H732 JIS Road Bike headset 1" threaded 27.0mm crown race
  • Taylor Wheels 28inch bike wheel set Shimano Alfine hub dynamo 8-speed
  • Schwalbe Tube Road 700 x 18-28c Presta Valve 40mm x 2
  • Schwalbe Tyre Hybrid Delta Cruiser White Wall 700 x 28
  • Shimano Nexus CN-NX10 Chain 1/2x1/8 114 Link
  • Dia Compe Center pull brakes(long reach) with front rack combo
  • Shiman Brake Levers
  • Brooks Flyer



Sunday, August 17, 2014

Vintage Apollo Mixte Restoration - Shimano 3 Speed Hub Disassembly


I got the frame back from the sand blasting and powder coating guys. I settled on a pearl white paint scheme for this one. The powder coating results are ok, but I do get a better finish when I paint the frames myself. You can see that the paint hasn't quite adhered to the metal on some of the high points on the frame, most notably near the bottom bracket. This was the first frame that I took to get powder coated and it will probably be the last. You just can't beat the attention to detail that you get when your painting your bike out of a passion rather than quickly pumping out as many powder coated products as you can to turn a profit.
Here's a pic of the frame with test fit bottom bracket from my box of spares.

Pearl White Apollo Frame - Nice!


Test Fitting the bottom bracket

A rainy weekend meant that I also got to spend some time on the rear wheel. A lot of what I do to this bike will be determined by what I can do with the rear wheel and built in Shimano 3 speed hub.

This was the first time I have pulled apart a vintage Shimano internal hub so I took plenty of photos during the disassembly. The condition of the hub and gears actually look to be in pretty good shape. There was plenty of accumulated dirt and grease in the hub as is expected but the pleasant surprise is that there was zero rust in the actual hub. This is great news as I was expecting the hub to have seized and hence why the gear cable had been snapped somewhere up the line. The following photos serve as a pictorial sequence on how the hub came apart, hopefully, putting it back together will just be reversing this order.


Step 1 - Plenty of junk on it - I was thinking the hub was seized at this point


Step 2 - The gear cable thingy has been screwed off, note the lock nut washer thingy



Step 3 - The nuts have been removed, clip spring thingy, and that long skinny bolt that runs through the hub


Step 4 - The Cog slides off, use your cone wrenches to loosen the cone


Step 5 - Looking into the heart of the hub
Step 6 - The non drive side of the wheel, loosen both bolts, care not to lose that spring


Step 7 - Now the whole things can come out
Step 8 - Note the position of that little piece of metal that stops the barrel falling out

Step 9 - All the parts as they came off, Right to Left, top row is non-drive side, second and third row are drive side


Next step will be giving these parts a bath in a degreasing solution, buying the adequate lubrication for the hub and putting it all back together.



Tuesday, July 15, 2014

New Restoration Project - Vintage Apollo Mixte

I took receipt of a vintage Apollo Mixte the other day. I have been wanting to build up a Mixte for quite some time and finally found one that is a great candidate for a restoration.


Apollo Mixte

The bike must have been sitting outdoors in the elements as is evident by the surface rust on the frame. Apart from the surface rust, the Japanese Tange Steel frame seems to be in pretty good shape.

Tange Steel.... Lovely!
The front wheel has a couple of broken spokes so I may try to source some spokes and try my hand at rebuilding a wheel. The rear wheel has a 3 speed Shimano hub that looks in decent shape.

Shimano 3 Speed hub, wonder if it still works.

I'm really digging the Center Pull brakes, but I may need to replace them for a new set as I've had a problem with the brake lever spring snapping on past bike restorations.

Center Pull brakes, loving these.
Good old English threaded bottom bracket is in decent shape, but I'm not sure if I'll keep the Cotter pins so it may get replaced.


English BB on Japanese Bike
I'm not too sure what I have in mind for the old girl, but I'm sure it's going to be a beauty. I've stripped the bike down and it has been sent to the Sand Blasting and Powder coating guys for a new lease on life.

Updates will follow during the build process. :-)